History of ATV [Infographic]

In this infographic the history of atv's is briefly explained which can be a great source of knowledge for the ATV lover's or even for the Atv owners.

Gorilla axles and Heavy Duty Boot Kit

How to Fix Your ATV’s CV Joint? [Infographic]

This infographic is highlighting about how to fix your ATV's constant velocity joints. One can take the complete advantage of the information provided in this infographic.

How to Fix Your ATV’s CV Joint?

Why You Should be Using CARB Approved Biodiesel

Fuel in its raw form is costly, dangerous for environment and even harmful for vehicles. Because of the high sulfuric levels present, diesel engine fuel creates friction in engine parts and burns at a rapid pace. This rapid combustion causes an increase in demand and therefore you will be spending thousands of dollars on fuel alone. Not to mention, raw fuel combustion is one of the leading causes of environmental pollution, harming human health and destroying the natural environment.


What is a Biodiesel Fuel Additive?
An additive is a chemical substance added into the fuel. It was created to counter the negative effects of fuel combustion. It creates a matt affect on the fuel and prevents its rapid burning while also decreasing the high sulfuric levels. With CARB approved biodiesel, there is a hope that the planet would not be adversely affected by fuel combustion. Here are five essential reasons why you should consider adding a CARB approved biodiesel to your fuel.

1. Enhanced Engine Performance : Untreated fuel can degrade engine performance because sulfur burns metal and overtime internal engine parts start eroding. This causes friction between vehicle parts and very often you will have to get your vehicle fixed. The fierce combustion rates make it hard for engines to remain lubricated and forces the engine to perform more than its designed capacity. Additives lubricate engine parts and prevent the fuel from clustering up. It also controls combustion rates which in turn improves acceleration and gives your vehicle optimal performance.

2. Cost-Effective CO2 Technology : Untreated fuel is not only expensive for a user, but also hits hard on the economy because of excessive pollution that harms agricultural yields and natural resources. Add to that the cost of health issues brought on by a polluted environment. Fuel treated with CO2 technology prevents creating a hole in your pocket and is good for the environment as it stabilizes fuel and decreases fuel burning rates. This means that every refill of treated fuel will last longer and will provide more stable performance than untreated fuel. It is estimated that your fuel economy can be improved by at least 15%. A nation’s economy can also improve because treated biodiesel will not release dangerous toxins in the environment, thus protecting natural life and human health.

3. Prevents Environmental Pollution  : CARB Approved Biodiesel fuel helps prevent environmental pollution and through that alone human life can improve. Developing countries have millions of people suffering from asthma, cardiac and lungs problem simply due to the excessive polluting smoke released by vehicles that use untreated fuel. Currently, the cost effective CO2 technology is ensuring that the environment remains safe from dangerous fuel emissions. You can contribute to a better environment, a healthier surrounding and a sound economy if you ensure the usage of CARB Approved Biodiesel for transportation and other industrial engines.

Did You Break Your ATV’s Polaris CV Joint?

An ATV is a powerful machine that you will see all too often on large sand dunes and sandy hills. It provides intense entertainment and more and more people flock to states like Utah for the summer with their Polaris Scrambler 500 to have fun. Even though ATV’s are designed for vigorous use, they are prone to damage and wear and tear over time. The CV Joint is usually one of the first things to go.

Why do CV Joints Break?
Many people ask this question. ATVs are very sturdy vehicles. They are designed to be durable and withstand extreme conditions and usage. With that being said, for it to break down because of a broken Polaris CV Joint is at times hard to comprehend. There is a reason behind it. The CV Joint takes the most pressure from all sides while riding. Not only is it negotiating the weight of the rider, it is also handling the unstable terrain, sharp turns and altering speeds. This puts an enormous strain on the Joint causing it to sometimes snap.

Preventative Measure to Safeguard CV Joints

Maintaining an ATV is no different than maintaining a vehicle. In order to keep your rig in top shop and to prevent the CV Joints from cracking, just follow the two simple steps mentioned below:

·         Routine Inspections – Carry out routine inspections on your rig. Look underneath the chassis and also around the CV Joints. Do this at least once a month. More if you are using it regularly.
·         Clean the Dirt – ATV tend to get very dirty very quick mainly depending on the terrain they have been used on. Therefore, a lot of dust and other particles can end up around the CV Joint and under the chassis. Be sure to keep everything under the hood clean. Either take it to a car wash or do it yourself in your garage.
·         Grease The Joint – The best thing to do in order to protect the Rhino Big Bear Grizzly 660 parts is to keep them greased at all times. This greatly assists the joint in its functionality and allows it to maneuver those extreme turns.

Riders must keep in mind that broken CV Joints are common. It does not mean you haven’t been taking care of your rig. If you are using it vigorously for long periods of time, it will eventually snap. However by following the above mentioned tips, you can be sure to prolong the life of your ATV. It is also recommended to tone down on the intensity and use that Polaris Scrambler 500 within safe limits and still have fun.

Cheap Arctic Cat Accessories

1999-2005 ARCTIC CAT 250 2X4 Rear Inboard Boot Kit

 

2008-2010 ARCTIC CAT 1000 4x4 Left Front Complete Axle

 1999-2000 ARCTIC CAT 250 2X4 Rear Outboard CV Joint

 

1999-2000 ARCTIC CAT 250 2X4 Rear Inboard CV Joint Rebuild Kit

 

1999-2000 ARCTIC CAT 250 2X4 Rear Half-Shaft

2006-2008 ARCTIC CAT 250 2X4 U-Joint

All You Need To Know About Axle

Alot of people love ATVs because they are fun to ride. However, very few users actually know the inside of this incredibly powerful and sophisticated piece of machinery. An ATV is no different than a standard vehicle in many ways. The body mechanics and design are the same and the ATV follows the same mechanical principles as that of an automobile.

One of the most important parts of an ATV is the Axle. This article will focus on the  axle for different models as they are very popular among riders. It will shed light on what an axle entails, how it is installed and what signs one should look out for in order to prevent the axle from completely breaking.


The Axle is a sturdy heavy duty half shaft axle designed for smooth maneuverability on rough terrains. It is made to withstand the vigorous use of driving an ATV. A standard axle comes with the following:

• The axle bar
• A fully assembled Polaris CV Joint Ranger Sportsman Scrambler 500
• Heavy duty CV Boot
• Inner heavy duty puncture resistant boot kit

Installing an Axle :

Because ATVs are generally used aggressively, a broken or faulty axle is somewhat common. The good news is that it can be replaced, however it does requires a combination of skill and strength. The following steps will outline the steps involved in the installation of a Axle.

• Removing the Tire – The axle is behind the tires. It has to be removed first.
• Removing the Caliper – Removing the tires exposes the brake caliper. It needs to be removed as well.
• Removing the Hub Nut – The hub nut is the last piece before the quad axle is fully revealed. It requires a lot of brute strength to loosen up the hub nut. Caution must be taken.
• Removal of the axle – Remove the old and install the new quad axle and follow the same steps in reverse.

Signs of a Faulty Axle

It is only natural for the axle to experience wear and tear with use and chances are it will get broken or damaged over the course of time. A damaged axle will indicate symptoms that if noticed in time can save the axle from being completely broken. These signs are as follows:

• Wobbling tires during acceleration
• Clicking or popping noise while turning the ATV
• Knocking sound while accelerating the ATV

ATV users should exercise caution and perform regular checkups on their ATV in order to keep it in top notch condition. Doing so can save them money and hassle in the long run.

Getting The Right Truck Rental

Truck rentals are used for moving, for the most part. They are used for the do-it-yourself moving, whether it is in-town moving, or various one-way moves. In-town moving is where the truck will be picked up then returned to the same location in the same town, and one-way moves are where the truck is picked up from one place and returned to another.

Varying Cost(s) : The cost of renting a truck will differ depending on the company you are using, amount of miles traveled, truck size, and availability. As most people move on the weekend, it is usually more expensive to rent during that time.

Availability and Demand : Some companies will rent by the day, for a set rate depending on the size of the truck, where other companies rent by a daily rate and a per-mile rate. Once again, these rates can change depending on the availability and demand.

One-way rentals : One-way rentals also are worked out on availability of trucks at the location where you will be picking the truck up, as well as the demand on them where the drop off point is, so price ranges can go up and down. The total number of days and miles you have rented the truck for are established by the departure location, and the destination, with extra days and miles charged.

Security Deposit : Typically, you will be required to submit a deposit before renting a truck, which is to ensure that there is no damage to the truck before returning it. Most companies will accept a cash deposit, but some companies will insist on a credit card deposit.

 

Driver’s Age Or Compulsory Licensed Driver : The mandates for taking possession of a truck will vary with each company, but all renters are required to have a valid driver’s license.
                                                                         A lot of truck rental companies will require the person who will be driving the truck to be 18 years old, 21 years old or 25 years old. And the person who actually rents the truck is held fully responsible for the truck in the event of an accident or theft, even if there is another person driving the truck. A few companies do allow more than one person to be insured if it is arranged in advance, and it will usually involve extra fees.

Learn more on : Waltco Lift gate and Stahl parts in NJ, PA, DE